General Introduction:
▶Our horizontal slurry pumps are designed for heavy-duty applications such as mining, minerals processing, mill discharge, power plants, tailings, and other industrial applications, for maximum abrasion, erosion, and corrosion resistance.
▶The pumps are in a wide range of sizes, available with both high chrome and rubber wearing parts. Components like impeller and volute come in a range of hard metal types and elastomers to suit the specific application.
▶Different shaft seal types are available to suit every requirement, including gland packing seal, expeller seal, and mechanical seal.
▶Our metal-lined slurry pumps are designed for heavy-duty industrial applications, to handle the most arduous slurries.
▶Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp-edged particles, or on duties having high impeller peripheral velocities or high operating temperatures.
▶The high head (high pressure) pumps are suitable for heavy-duty applications where require a higher head per stage or higher pressure.
▶They are mainly used for long-distance transportation or other applications where more than one pump is required.
▶SBH slurry pump liners were designed to produce high heads per stage at high pressures.
Specifications:
| Pump Model |
S×D (inch) |
Allowable Max. Power (kw) |
Material | Clear Water Performance | Impeller | ||||||
| Capacity Q | Head H(m) |
Speed n(r/min) |
Max.Eff. η% |
NPSH (m) |
No. of Vanes |
Vane Dia. (mm) |
|||||
| Impeller | m3/h | l/s | |||||||||
| SBH/25C | 1.5×1 | 30 | Metal (A05) |
16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 5 | 330 |
| SBH/50D | 3×2 | 60 | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 457 | ||
| SBH/75E | 4×3 | 120 | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2-5 | 508 | ||
| SBH/100F | 6×4 | 260 | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 720 | ||
| SBH/100S | 6×4 | 560 | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 720 | ||
| SBH/150S | 8×6 | 560 | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4-12 | 711 | ||
Materials:
| Description of Parts | Material | Material Code |
| Pump Body, Split-Casing | Grey Iron | G20/G21 |
| Ductile Iron | D20/D21 | |
| Impeller, Volute, Wear Liners, Expeller, Expeller Ring, Stuffing Box |
27% High Chrome | A05 |
| 28% High Chrome, Low Carbon | A49 | |
| Shaft | 304 Stainless Steel | C21 |
| 316 Stainless Steel | C23 | |
| Shaft Sleeve | 304 Stainless Steel | C21 |
| 316 Stainless Steel | C23 | |
| Aluminum Oxide Coating, White | J04 | |
| Chrome Oxide Coating, Black | J05 |
Applications:
Ball/rod mill discharge
Coarse sand/tailings
Minerals concentrate
Heavy media
Bottom/fly ash, lime grinding
Features and Advantages:
▶Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime
▶Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs
▶Minimal shaft/impeller overhang reduces shaft deflection and increase packing life
▶Effective expeller prolongs packing life while reducing or eliminating flush water requirement.
